-
About UsYongbang dry spirit of enterprise is "practical work, humility, peaceful competition, development and development". It is under the inspiration of this spirit that we have embarked on the road of establishing and building Yongbang enterprises. Yongbang Dry and Yongbang Intelligence are a group of young intellectuals. We follow the behavior principle of "peaceful competition, development and development". To be the master of modern economy and the standard bearer of new energy equipment.
-
Products
-
-
-
News Center
INDUSTRY CASES
Industry case
Multi-shaft screw conveyor generally refers to the combination of multiple shafts together to increase the conveying capacity. There are two common screw conveyor is also called double screw conveyor, three screw conveyor, four screw conveyor, six screw conveyor. According to the requirements of working conditions, each shaft can be driven independently or through gear transmission. It can realize the functions of conveying, stirring, mixing and cooling at the same time.
Customization Description: The equipment can be customized according to customer requirements.
Negative pressure dilute phase pneumatic conveying system
The negative pressure dilute phase pneumatic conveying system uses Roots vacuum pump as the power source, the pressure of the conveying pipeline is in a low-pressure vacuum state, the wind speed in the pipeline is about 10~30 m/s, and the material is atomized in the pipeline. The starting pressure of negative pressure conveying is equal to or close to atmospheric pressure, and the end pressure is between -10 and-60KPa, and the vacuum degree of the pipeline gradually increases along the conveying pipeline. Negative pressure dilute phase pneumatic conveying system is also called vacuum dilute phase pneumatic conveying system.
Positive pressure dense phase pneumatic conveying system
The positive pressure dense phase pneumatic conveying system uses compressed air as the conveying medium. Material in the pipeline at a lower speed, dune state, fluidized or agglomeration state of transport is called positive pressure dense phase pneumatic conveying. The air source generally used is an air compressor, and the conveying pressure can be from 0.2MPa to 0.5MPa according to different working conditions.
Disc dryer as an indirect heating drying equipment has been used in the chemical industry, food industry and feed industry for decades. The main body of the disc dryer is composed of a cylindrical shell and a set of discs through the center. The heat medium flows through the hollow disc group and transfers heat indirectly to the material through the discs. The material passing between the disc and the shell is heated by the heat conduction of the disc and evaporates water. The water vapor formed by drying is gathered in the dome above the disc and taken out of the dryer by a small amount of hot air. The disc dryer uses the double-sided heat transfer of each disc to provide a large heat exchange area in a small space, which makes the disc dryer compact.
Yongbang company is a professional manufacturer of blade drying machine. The blade drying machine with wedge-shaped structure is the first generation of traditional products in China. It is a low-speed stirring drying machine with conduction heating. A jacket is arranged on the dryer cylinder, and a hollow paddle is arranged on the hollow shaft, in which a heat carrier is introduced. Under the agitation of the stirring paddle, the wet material conducts sufficient heat and mass transfer with the cylinder and the hot surface of the paddle to achieve the purpose of drying. The structure is generally horizontal, biaxial or four-axis form.
YPG series pressure spray (cooling) dryer
The working process of the unit is that the feed liquid is fed through the diaphragm pump under high pressure to spray mist droplets, and then flows down in parallel with hot air. Most of the powder particles are collected by the discharge port at the bottom of the tower. The waste gas and its fine powder are separated by the cyclone separator. The waste gas is discharged by the exhaust fan. The powder is collected by the pollination cylinder located at the lower end of the cyclone separator.
Centrifugal spray dryers are divided into open type and closed type. They are mainly used in the drying production of battery materials, positive and negative electrode materials and sodium ion materials. They adopt high-speed centrifugal spray atomization technology (linear speed can reach 250 m/s) which is in line with the most advanced international technology. While realizing continuous drying production, they can obtain micro-spherical particles with uniform particle size, compact structure and good fluidity. To a large extent, high-speed centrifugal atomization technology, it can effectively improve or increase the packing density of the positive electrode material lithium iron phosphate, so that the monomer particles can reach 3 ~ 5μm and the moisture content of the finished product is 0.5%. The magnetic filtration technology is applied to effectively avoid the incorporation of iron ion impurities in the production process, so as to achieve the purpose of material purity and maintain the conductivity of the positive electrode material. The recycling of waste heat gas can achieve the production purpose of energy saving and emission reduction, and conform to the energy saving and emission reduction and low-carbon production mode advocated by the state.
Service Hotline
Address: No. 28, Park Road, Bieqiao Town, Liyang City, Changzhou City, Jiangsu Province, China
E-mail: yongbang@jsybzn.cn
WeChat public number
Get more services
Copyright©2024 Jiangsu Everland Intelligent Equipment Technology Co., Ltd. www.300.cn | SEO